What is acrylic wallpaper?
The material is a two-layer coating, paper or vinyl and acrylic. Foamed acrylic is applied to the paper base using the dot method, according to the same principle as vinyl wallpaper. As a result, an airy, breathable relief pattern is formed on the surface. The polymer coating is safe for interior decoration, acrylic does not emit harmful substances.
Main differences from vinyl
Acrylic wallpaper is similar in characteristics and production method to vinyl. However, they still have some differences.
- Acrylic and vinyl coatings have different thicknesses of the top layer, vinyl has 4 mm, acrylic has only 2. This fact affects the wear resistance of the coating.
- Acrylic coating is cheaper,
- Acrylic wallpaper has less moisture resistance.
Pros and cons
Like any finishing material, acrylic coating has its advantages and disadvantages. Having compared all the characteristics of the material and the room, you can make a decision regarding this type of finishing.
Types and characteristics
Paper-based
Eco-friendly material. Canvases with a paper base can be used for finishing a child’s room and bedroom. At the same time, this type has the least strength, the service life of the coating is short. When pasting, the adhesive composition is applied to the surface of the walls and to a piece of wallpaper, after which they are immediately connected. Paper does not interact well with liquids, so finishing work must be done consistently and quickly.
On a non-woven backing
Acrylic wallpaper on a non-woven backing is stronger than paper. The elastic first layer is durable and can withstand even a crack in the wall. Non-woven wallpaper is easier to glue, it does not need to be measured precisely, as with the paper type, the remainder is cut off after pasting.
Liquid wallpaper
Liquid acrylic wallpaper is initially a dry mixture, which is diluted with glue before work. The surface after application has no seams and looks like plaster. In order to ensure maximum adhesion of surfaces, the walls must be primed before applying the material. This procedure also helps to avoid fungus and mold.
The photo shows an attic converted into a children’s room. The walls are finished with liquid wallpaper with an acrylic coating in a light color scheme.
Painting acrylic wallpaper
What glue to use?
There is no fundamental difference between pasting acrylic, paper or vinyl wallpaper. They all “sit” on glue on a pre-prepared surface. The glue intended for vinyl wallpaper will do, but it is better to choose the one recommended by the manufacturer, as it will take into account all the nuances of the material.
Step-by-step instructions
Work on pasting acrylic wallpaper is carried out in several stages. It has no fundamental difference from other wallpapers or individual difficulties. For the best result, it is necessary to close all windows, doors and get rid of drafts in the apartment until the walls are completely dry.
- Cleaning the walls. It is necessary to remove the old coating.
- Primer. The walls are primed for better adhesion of the material to the walls. If necessary, fill cracks and uneven areas with putty, then prime the surface again.
-
Prepare the adhesive. The process of diluting the glue is described quite clearly on the packaging. It may differ slightly depending on the manufacturer, so before you start preparing it, you need to read the instructions in detail.
-
Measurements and preparation of strips. To do this, measure the length of the walls and cut strips of the required length from a roll of wallpaper, adding a few centimeters for reserve. Such preparation simplifies and organizes the gluing process.
- Marks on the wall. Before you start working, you need to measure out a straight vertical strip equal to the width of the wallpaper. The vertical mark is measured using a level or plumb line; it allows you to glue the wallpaper straight vertically, without “tilting” the strip.
- Apply glue to the wallpaper strip and the wall using a brush or roller and leave it for a while to soak, after which the strip is applied and fixed to the wall. Acrylic wallpaper on a paper backing does not require time after applying the adhesive, but is immediately glued to the wall.
-
Smoothing. After pasting, smooth the wall with a soft cloth or brush. A plastic spatula is not suitable for this type of wallpaper, it can damage the surface structure.
-
After drying, you can remove excess wallpaper.
Prepare the adhesive composition. The process of diluting the glue is described quite clearly on the packaging. Depending on the manufacturer, it may differ slightly, so before you start preparing it, you need to read the instructions in detail.
Preparing the adhesive. The process of diluting the glue is described quite clearly on the packaging. Depending on the manufacturer, it may differ slightly, so before you start preparing it, you need to read the instructions in detail.
Measurements and preparing the strips. To do this, measure the length of the walls and cut strips of the required length from the wallpaper roll, adding a few centimeters for reserve. Such preparation simplifies and organizes the pasting process.
Measurements and preparing the strips. To do this, measure the length of the walls and cut strips of the required length from a roll of wallpaper, adding a few centimeters for reserve. Such preparation simplifies and organizes the pasting process.
Smoothing. After pasting, the wall is smoothed with a soft cloth or brush. A plastic spatula is not suitable for this type of wallpaper, it can damage the surface structure.
Smoothing. After pasting, the wall is smoothed with a soft cloth or brush. A plastic spatula is not suitable for this type of wallpaper, it can damage the surface structure.
After drying, you can remove excess wallpaper.
After drying, you can remove excess wallpaper.
Video
Care and cleaning rules
Any surface in the house requires periodic care, as dust settles on them, even without obvious visual signs. Walls are no exception. Acrylic coating has some features for care, however, like any other. By following the simplest rules of care, the service life of acrylic sheets can be extended, and the appearance can be preserved in its original form.
- Acrylic coating “does not tolerate” abrasive cleaning agents and rough brushes,
- cleaning is done with gentle soft movements,
- for preventive purposes, it is enough to go over it with a soft brush or a dry cloth,
- this is not washable wallpaper, but for wet cleaning you can use a damp soft cloth,
- water, or rather a sponge soaked in it, will help get rid of the stain,
- for “difficult” stains, you can use special liquids for acrylic surfaces.
Photo in the interior
Acrylic wallpaper will look harmonious in the interior of any room, the texture and unpretentious relief will be a successful design for classic and modern design.
The photo shows a bedroom with acrylic wallpaper, painted in the color “powder”.
The ability to paint the surface allows you to choose the perfect tone. Acrylic wallpaper will look good in the interior of any room.
The environmental friendliness of the material allows it to be used in any room, and therefore in the children’s room.
The photo shows a bedroom in a modern style. The geometry of the wall decoration makes the room visually wider.
