How to make storage organizers with your own hands?

Jewelry Storage Organizer

Jewelry, especially those made of precious metals and stones, requires careful and safe storage. You can make an organizer yourself if you have the necessary materials at hand.

Necessary materials and tools:

• a box with several small compartments;
• felt fabric;
• wrapping paper;
• PVA glue.

Sequence of actions:

1. Measure the internal dimensions of one box to determine the size of the pads. The rings will be placed on them later.
2. Cut out rectangles from felt fabric, the width of which corresponds to one of the sides of the inside of the box.
3. Fold each piece of fabric into a tube, fix the edges with glue. To make the elements more rigid and voluminous, sheets of wrapping paper are placed on top of the felt blanks before forming them.
4. Each box is filled with tubes to create dense relief cushions. If there are gaps between the elements, it is better to glue them to the paper base using double-sided tape and then place them in the box. This will make them stable.

The recesses between the felt tubes are convenient for storing rings. However, you can also place other jewelry in the compartment: bracelets, pendants, etc. This device can also be used to store cosmetics, small items, and needlework items (threads of different colors, pins, and other accessories).

Organizer for needlework

Small needlework items are conveniently stored in one place. You can sew a DIY organizer from any old fabric.

You will need the following items:

• 2 identical patterns made of denim with sides of 40 and 27 cm;
• 2 patterns made of calico measuring 25*15 cm;
• 2 zippers;
• decorative tape;
• elastic cord;
• button.

Step-by-step instructions:

1. Make patterns for the main parts. First, cut out 2 rectangles from different types of fabric: denim (for the base) and calico (for the pockets). The size of the first type of parts is 40*27 cm, the second – 25*15 cm.

2. Fold the pocket patterns in half at the corners and sew at a distance of 3 cm from the edge. In this way, process all 4 corners of each calico part.

3. Cut the processed patterns into 2 unequal parts.

4. We overcast each of the 4 received elements on the overlock.

5. We place the lock on the middle of the pocket cut, baste and sew on the allowances.

6. From calico we cut out 4 rectangles with sides of 4 and 3 cm, fold on 2 sides and iron.

7. Fasten the zipper on both sides.

8. Place 2 facings on each pocket: at the beginning and end of the zipper. Sew, then cut off excess fabric.

9. Fold the pocket edges inward 1 cm and stitch.

10. Baste the pockets to the denim blank, orienting them as desired. Sew.

11. Mark the middle of the upper edge, from which we measure 7 cm in both directions, and 3 cm down. Make buttonholes at the found points.

12. Thread the cord through the holes.

13. Fasten the corners of the pattern, sew the tape along the edges.

14. Attach a loop of elastic to the middle of the top. Connect the denim piece with the second identical pattern, orienting them with the front sides inward. Stitch along the edge, without touching the tape. Don’t forget to leave 10 cm for turning.

15. Turn the piece inside out, sew up the holes by hand.

16. Sew on a button. Fold and fasten the organizer.

This organizer can be used as a cosmetic bag or a storage system for any small items.

Organizer for office supplies

An organizer for pens and pencils helps to rationally organize your workplace and ensure productive work. The simplest such device can be made from ordinary glass jars, a piece of board, wire, which can be easily found in almost any apartment.

Sequence of actions:

1. Cut out the base of the future stand from the board. You should choose such dimensions so that all the jars fit on the blank.
2. Cut 4 small columns from the board 3-5 cm below the top edge of the containers. They will act as limiters.
3. Sand the blanks, paint and varnish if desired.
4. Place the columns at a distance at which they will be attached to the base. Attach 2 dowels to each of them, and wrap the wire around them to form a “fence.”
5. Assemble the organizer body: attach the blanks to the previously prepared piece of board.
6. From the end edges, the posts are fixed with jumpers.

Spice Rack

A stand for storing spices and seasonings ensures proper storage and quick access to the necessary components. You can make it yourself from glass test tubes, which are more compact and convenient than traditional jars.

To make an organizer, you will only need a board and laboratory containers. Additionally, you should prepare rubber O-rings with a diameter of 18 mm, pieces of cork wood, and stain.

Step-by-step plan:

1. Prepare a drawing of the rack to which the test tubes will be attached.
2. Cut out 3 blanks: walls and a horizontal bar.
3. Using a ruler, mark the areas of the holes on the surface of the main board in which the test tubes are planned to be placed.
4. Drill holes with a Forstner drill.
5. Sand all the blanks and, if desired, cover them with stain.
6. In the side walls Saw and grind the grooves into which the horizontal bar will fit. Choose their location at your discretion.
7. Assemble the structure by gluing the blanks together using wood glue.
8. Attach seals over the holes and arrange the test tubes.
9. Insert a stopper into each vessel, cut strictly to the size of the neck.

Fabric organizer for cutlery

A fabric organizer is one of the best ideas for storing cutlery. It not only protects items from dirt and moisture, but is also very convenient. This device can be easily rolled into a roll, which takes up little space. You can make it from a regular linen towel or durable jeans material.

Sequence of actions:

1. The towel is carefully ironed and placed on the table with the front side down.
2. One of the short sides is folded by 2-3 cm and secured with pins. Sew along the entire length.
3. On the same side, make a hem 18 cm high and sew along the edges.
4. Place the cutlery in the pocket in the desired order, and stitch vertical lines between them to create narrow pockets.
5. Fold the top of the towel so that the cutlery does not quite reach the edge. Secure with pins and stitch along the entire length.
6. The white wide ribbon should be oriented and sewn in the center.
7. Roll the organizer into a roll and tie it.

Kitchen organizer

Kitchen tools should always be at hand. To organize them, you can make a simple storage system from scrap materials. You will only need a wooden block as a base and narrow cardboard cores from rolled materials. Wrapping paper and paints are used as decoration.

Step-by-step instructions:

1. Cut the cardboard tubes into segments, the height of which is equal to the width of the main block.
2. Paint each element on both sides and cover with wrapping paper.
3. Attach all the parts to the base.
4. Attach the block to the wall, then hang up the tools.

This organizer can also be hung in the bathroom to organize the use of various accessories. To prevent it from getting wet, it is painted with waterproof acrylic paints.

Organizer for garden tools

Garden tools are often in disarray, which makes it difficult to quickly find them. However, there is a way to place frequently used tools so that they do not clutter the space and are easily accessible at any time. A convenient wooden organizer will help solve the problem.

You will need the following for making it:

• wide wooden board;
• brackets;
• fasteners.

Sequence of actions:

1. Measure the length of the future holding board. For this purpose, the tools are laid out on the floor in the order in which they are planned to be hung. Using a tape measure, measure the distance between the handles of the outermost devices, add 30 cm and record the result.
2. Cut out a board of the length determined earlier and mark the holes.
3. Drill holes 5 cm in diameter along one of the long sides, slightly extending beyond the edge to form slots.
4. Sand the workpiece, and if desired, polish and paint it.
5. Attach brackets to the wall. When placing them, select the height taking into account the length of the garden devices so that their lower end does not touch the floor.
6. Attach the board to the brackets so that the slots are in front. Attach hooks for smaller tools and accessories.
7. Hang up the tools.

Organizer for working tools and accessories

In a home workshop there are always a lot of working tools and accessories that are often in disarray. You can solve this problem with a homemade 2-level organizer installed in a drawer of a table or cabinet. To make it, you only need to take strips of plywood, a few nails and wood glue.

Step-by-step instructions:

1. Items are laid out by size to determine the approximate dimensions of the cells.
2. Strips are cut from 6 mm thick plywood, from which the internal frame of the drawer will subsequently be formed. It is taken into account that their width is half the internal height of the table drawer.
3. Mark and cut out the grooves with which the parts will be attached to each other.
4. Assemble the structure, fixing the corners with wood glue and nails.
5. Place the frame in the drawer.
6. The second level structure is made using the same principle.
7. Lay out the tools and accessories.

Constructions of this type are used in the manufacture of organizers for small items, linen, etc. They are easy to assemble and convenient to use.

Shoe storage

To get rid of the clutter in the hallway, it is advisable to organize shoe storage. You can make an organizer from any materials, but the most original and simple product will be made from PVC pipes.

Sequence of actions:

1. Prepare 9 pieces of pipe of the same size.
2. Align the end sides and carry out grinding work.
3. Paper the blanks with wallpaper or self-adhesive film.
4. Arrange the cuts in 3 rows and fix them together with epoxy glue or fasteners.

The elements are connected in any convenient way, there are no limits for imagination here. To develop the best concept, you should study the photos of similar projects.

Document organizer

A desktop organizer helps to keep documents in strict order, and is especially useful when you have to work with a lot of papers. You can make a stand with your own hands from ordinary cardboard. You will also need white office paper and office glue.

Multifunctional kitchen organizer

There are many devices used in the kitchen that also need to be rationally organized. You can create a multifunctional storage from readily available materials: plastic bottles, tin cans, boxes. To make them beautiful, glue them with soft mosaic.

Organizer for storing fasteners

Fasteners are stored sorted by size in one place to easily navigate their variety and not waste time searching for the right hardware. For this purpose, various types of organizers with multiple compartments are used. A convenient and easily reproducible design is based on polymer pipes and plugs.